Belts

Search with the poly v-belt characteristics:

How to read belt numbers

0
Haier
1270J5

Haier washing machine Belt PJ 1270 / 1270J5

The PJ 1270 / 1270J5 belt is a 1270 mm rubber strap with 5 grooves that allows the tub of your Haier washing machine to turn. It is sold at the best price and will be delivered within 24 hours.

Check that your device is compatible

High Demand! During the last 24 hours, this product has been viewed 294 times.

Compatible
spare
£8.60 incl. tax
 
★★★★★ ★★★★★
9 Reviews

In stock: 5

-36%
Genuine
spare
£12.20 incl. tax
£19.10 -36%
★★★★★ ★★★★★
16 Reviews

In stock: 20

+ -
Add to cart

Same day shipping

Return and free exchange within 15 days

Specifications

Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt) 1270J5

Elastic belt : no

Length : 1270 mm

Section : J

Ribs : 5

Fits in : washing machine / washer

Compatible with the following brands : Haier

Reference : C00027206, 81899016, 8996451209200, 34010054, 598110000035, C00194425, 34011093, 8059131272062, 49051284, 00214400402006, , 5PJ 1270, 1270 J5, PJ 1270

Weight : 49 g


* Subject to technical changes; no liability accepted for the accuracy of the information given.

Product Description

The drive belt of your Haier washing machine is worn out and must be replaced by the PJ 1270 / 1270J5 belt in the following cases:

  • the washer starts, you can hear the motor but the machine drum is blocked or does not turn properly;
  • the washing machine makes rubbing noises, squeaking or whistling during operation;
  • the washing machine smells hot or trips due to overheating.
The PJ1270 belt (poly-Vee, drive belt) can also be called: 1270J5, 1270 J5, 1270 PJ, 5J1270, 5PJ 1270.

Top Questions

How to repair your appliance? Experts will help you...

To dismantle the drum tree of the rotor cover, you must follow the following steps: 1. First, remove the back cover and the top cover to have a complete view of the inside. Looking from the back, you will see a pulley and a belt that you will need to remove. Continuing to look from the back to the front, you will notice several screws around the shaft. Use an 8mm socket wrench to remove these screws. There are about 20 in total. Disconnect the wires from the resistor. There are 3 to disconnect, as well as other wires that are the thermistor. Once the wires are disconnected, remove the nut that secures the drum pulley. Then remove the pulley and an aluminum cone that is on the shaft. If you wish, you can hit the cover with a rubber mallet to remove it from the back. Otherwise, you can also choose to replace the bearings, the retaining ring, and the drum support. By following these steps, you will be able to dismantle the drum tree of the rotor cover of your washing machine.

Belt 1270J5

Compatible spare £8.60

Buy now

Here are examples for partial reference for home appliances :

Where to find the reference?