Tip of the day

The water reaches the washing machine correctly INDESIT but the wash cycle does not start. The machine makes a humming noise. The condenser has been changed but the noise remains. The noise must be coming from the belt. Remove the front of your washing machine and then remove the belt. Select a wash program and check if the motor is running. If it is running normally, the problem may be in the gearbox. Check that you can manually turn the pulley. If the motor does not turn, the problem may be in the motor plate or wiring. When you loosen the belt, the wash cycle starts and then stops after a few minutes.
The motor is working properly. Check that the pressure switch hose is not cracked or clogged. The pressure switch is the device that detects when the pressure of a fluid exceeds a predetermined value. After checking the hose, remove it as the tub blows towards the pressure switch while holding the air. Start the washing machine. The motor without the belt should run. By turning the pulley manually, the drive should move correctly on the tray. Replace the washing machine belt, making sure to tighten it sufficiently so that it does not slip when you use a wash program on your machine.