- Free delivery *
The 5PJ 1270 / 1270J5 belt is a 1270 mm rubber strap with 5 grooves that allows the tub of your washing machine () to turn. It is sold at the best price and will be delivered within 24 hours.
High Demand! During the last 24 hours, this product has been viewed 286 times.
Same day shipping
Return and free exchange within 15 days
SpecificationsSpare part : ribbed belt (serpentine belt or poly-Vee Drive belt)
Elastic belt : no
Length : 1270 mm
Section : J
Ribs : 5
Fits in : washing machine /
Reference : C00027206, 81899016, 8996451209200, 34010054, 598110000035, C00194425, 34011093, 8059131272062, 49051284, 00214400402006, , 5PJ 1270, 1270 J5, PJ 1270
Weight : 49 g
Product DescriptionThe drive belt of your washing machine () is worn out and must be replaced by the 5PJ 1270 / 1270J5 belt in the following cases:
Top QuestionsTo repair your washing machine, follow these steps: - Remove the back cover. - Disconnect the heating element and thermostat. - Loosen the nut on the large pulley and remove it. - Remove the ground wire under the pulley. - Put the nut back on the shaft. - Remove all the screws around the cover of the white plastic tub. - Push the tub cover back to remove the stainless steel drum. This may be difficult, so be careful. - Put the nut back on the shaft and remove it. - Have someone hold the drum cover by the edges while you use a block of wood and a large hammer to tap on the shaft and remove the stainless steel drum. - Once removed, check the condition of the bronze retainer glued to the shaft. - If everything is in good condition, replace the rubber seal, both bearings, and apply lithium grease. - Then proceed with the assembly by following the reverse steps of the disassembly.
A young team trained
Secure transaction
Free shipping *
Free returns and exhanches : satisfied or your money back for 15 days
Here are examples for partial reference for home appliances :
Where to find the reference?
In stock