Tip of the day

The drum of the dryer BOSCH is turning with difficulty. This is most likely a belt problem. If the belt is worn or broken, the dryer cannot operate normally. The laundry cannot be dried and there is a risk of the motor overheating. Unplug the appliance and remove the plate on the back of the dryer to disconnect the cables by unscrewing the holding bar.
Pass the belt under the impeller and between the back wall and the drum. The grooves should be in contact with the drum. Reassemble the back panel of the dryer. The dryer belt should be placed on the idler using a screwdriver for leverage. Turn the drum by hand to make sure the belt is turning properly. The belt should be tight enough that it does not slip during a drying cycle. Replace the machine cover and connectors. Align the side panels and the top panel of the dryer correctly so that the machine does not vibrate during use.
To verify that the machine is working, select a short program with no load in the tub to prevent the machine from overheating.