Tip of the day

If the laundry is no longer spun at the end of the wash cycle, the malfunction is due to the belt, which may be worn or broken. The belt is no longer able to drive the drum during the spinning phase. It is also possible that the machine makes a squeaking noise during this phase. The basket is not locked, the belt is slipping, the motor is running well, but the drum cannot turn. The motor is under the basket and it is difficult to access the belt to tighten it. Remove the screws on the back of your machine so you can remove the front panel and access the motor. Remove the belt by pulling it towards you and check for wear. Get a new belt of the same model. The part number of the belt is marked on the part. Measure the diameter. Check that the drum does not have any bearing problems and when it is loaded it becomes very heavy. The pulley that is in the basket has two independent discs that are attached with springs. This model of dryer uses the technology of the first models of the brand, with a variable pulley.