Tip of the day

The belt on the bread maker is broken. Get a new belt, making sure it is compatible with the model of the bread maker. The belts used for this type of machine are usually toothed. You can find the part number on the rubber of the original belt. Disassemble the bread maker. Remove the cover of the machine by pulling on either side or unscrewing the hinges. Rotate the bowl out and unscrew the screws from the inner compartment of the machine and remove it. Remove the entire top panel. Take care to disconnect the cable between the electronic board and the control panel. Unscrew the screws of the bottom of the compartment and the screws holding the electronic boards located at the bottom of the machine. Take out the compartment and the electronic boards to access the belt. Remove the belt. To install the new belt, unscrew the central screw that holds the pulley and keep the washer. The belt should be placed between the belt and the motor. Unscrew the belt to wrap the belt around and replace the pulley. The washer should be placed between the pulley and the nut. Replace the bowl and cover of the bread maker. Test the machine before replacing all the screws.