1270 PJ / 1270J5 drive belt

How to repair your appliance? Experts will help you...

You took a few days to test this washer-dryer and be able to deliver it to the customer. It turns out that you first tested it with water only and it worked perfectly. Then, you tested it with clothes loaded and it also worked well, except for a noise similar to that of a belt or motor wheel. Today, when you performed a test before taking it to the customer, you turned it on and once again an error 6 appeared. You slightly moved the wires and the tab, but it didn't change the situation. Every time you turned it on with loaded water, an error 6 appeared and the water was drained. Finally, you made another attempt until it stopped loading water permanently, then you decided to remove the motor and try with another similar motor that worked very well before. Anyway, you performed tests and the results indicate continuity between pins 1-3 and 1-7 of the motor board, as well as continuity in both tachometer wires. Everything seems to be in good condition. Then, you bridged pins 7-6 and applied a voltage of 220 volts to pins 2-3, which caused the motor to rotate clockwise. You also bridged pins 2-3 and applied a voltage of 220 volts to pins 7-6, which also caused the motor to rotate clockwise.