Tip of the day

The drum of the dryer BEKO has stopped turning and the differential has jumped. A terminal on the motor capacitor became disconnected. When it came into contact with the side plate, the automatic circuit breaker tripped. Once the faston terminal was connected, the differential did not trip again and the motor ran.
The small tension spring located on the small pulley and the arm that should have a spring gives tension when the belt or band passes through the pulley. If the spring is no longer in place, the dryer belt BEKO is no longer taut enough and that is why no tension is applied to adjust the belt or band so that there is enough traction to move the drying drum. If the belt is placed inside the pulley/tensioner, it is not tensioned enough. You can put an additional tension spring in the opposite side of the spring already in place, attached by a taut rope to the frame to tighten the belt so that the drum can run.