Haier washing machine Belt 1270 J5 / 1270J5

How to repair your appliance? Experts will help you...

To start repairing your washing machine, you need to remove the back cover of the machine. Then, loosen the nut of the pulley and remove the belt. Also, disconnect the heating element and the thermocouple. To access the drum, remove the 21 or 23 screws around the drum cover. Then, remove the nut and the pulley. You can then pull the drum cover backwards, which will allow you to remove the steel drum. Once the drum is out, place it face down on the floor. Using a wooden block and a hammer, strike the shaft to separate the drum from the drum cover. It will take several strong and precise hits to achieve this. Again, several strong and precise hits will be necessary. Once the drum is separated, you can access the two bearings and the retaining ring located in the hub cover. The first element to replace is the retaining ring, as well as the drum-side bearing (exit and entrance on the drum side) and the pulley-side bearing (exit and entrance on the pulley side). By following these steps, you will be able to effectively repair your washing machine.