Whirlpool washing machine Belt 4J 1314 / 1314J4

How to repair your appliance? Experts will help you...

If it is too tight, you will need to loosen it slightly. If it is loose, you will need to tighten it. Also, make sure that the belt is not damaged or worn, in which case you will need to replace it. As for water leaks, you should check if the water inlet hose is properly connected and if there are no leaks at this level. Also, check if the drain hose is securely attached and if there are no leaks at this level. If you notice any leaks, you will need to tighten the connections or replace the hoses if necessary. If the filter is dirty, you will need to clean it. You can also check if the drum is balanced and if the washing machine' sfeet are properly adjusted. If the drum is unbalanced, you will need to readjust it. If the washing machine's feet are improperly adjusted, you will need to adjust them to ensure stability. If that is the case, remove the obstruction. Also, check if the door latch is functioning properly. If the latch is broken or damaged, you will need to replace it. If the hose is clogged, you will need to clean it. You can also check if the drain pump is functioning properly. If the pump is defective, you will need to replace it. Remember to unplug the washing machine before performing any repairs or manipulations.