- Free delivery *
The 1965 PH / 1965H7 belt is a 1965 mm rubber strap with 7 grooves that allows the tub of your tumble dryer () to turn. It is sold at the best price and will be delivered within 24 hours.
High Demand! During the last 24 hours, this product has been viewed 333 times.
Same day shipping
Return and free exchange within 15 days
SpecificationsSpare part : ribbed belt (serpentine belt or poly-Vee Drive belt)
Elastic belt : no
Length : 1965 mm
Section : H
Ribs : 7
Fits in : tumble dryer /
Reference : 482000023382, C00297210, 57X2507, 57X0545, AS0040371, 1033913, 12638200000032, 3251430508896, 251430508896, 144003064, , 7PH 1965, 1965 H7, PH 1965
Weight : 59 g
Product DescriptionThe drive belt of your tumble dryer () is worn out and must be replaced by the 1965 PH / 1965H7 belt in the following cases:
Top QuestionsTo begin, you need to remove the belt from the dryer. Then, you must remove a long screw located on the top of the drum cover. This screw holds a clamp that closes the cover onto the drum. Once the screw is removed, you can remove the cover, being careful of a rubber seal located between the cover and the tank. If you need to put this rubber seal back in place, use Fastix or a similar sealant during assembly. Before removing the cover, make sure to disconnect the heating element and the fixed thermostat. It is important to mark the wires to avoid mistakes during reassembly. In some models, you may also find a mechanical temperature sensor. Do not cut the cable of this sensor, simply remove it from the washer it is attached to, and then replace it with contact cement. In the dryer cover, you will find the roller and the drum shaft retainer. These parts should be replaced if they are damaged.
A young team trained
Secure transaction
Free shipping *
Free returns and exhanches : satisfied or your money back for 15 days
Here are examples for partial reference for home appliances :
Where to find the reference?
In stock