The 5J 1190 / 1190J5 belt is a 1190 mm rubber strap with 5 grooves that allows the tub of your Siemens washing machine to turn. It is sold at the best price and will be delivered within 24 hours.
Same day shipping
Return and free exchange within 15 days
Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt) 1190J5
Elastic belt : no
Length : 1190 mm
Section : J
Ribs : 5
Fits in : washing machine / washer
Compatible with the following brands : Siemens
Reference : 00214400002200, 00283729, 49050977, , 5PJ 1190, 1190 J5, PJ 1190
Weight : 46 g
The drive belt of your Siemens washing machine is worn out and must be replaced by the 5J 1190 / 1190J5 belt in the following cases:
You own a multimeter, but it does not have the microfarad function. To work around this limitation, you can proceed as follows: get a lamp, a socket, and two cables. Place one of the cables directly on the lamp holder, then connect the second cable to a capacitor cable (of your choice). Finally, connect the free cable of the capacitor to the lamp holder. If everything is done correctly, the lamp should light up, but with reduced brightness compared to a direct connection. If you prefer, you can also replace the capacitor, as it does not represent a significant cost. It is possible that rusty bearings may be the cause. To check, disconnect the belt and make sure the turbine can rotate freely by hand. Then, unlock the drum by pulling on the drain motor cable by hand and check if the entire drum can be manually rotated.
Here are examples for partial reference for home appliances :
Where to find the reference?