Electrolux tumble dryer Belt 1938 H7 / 1938H7

How to repair your appliance? Experts will help you...

You would like to know how to change the bearings and shaft of yoru XXX_BRAND_XXX washing machine model AWM 468. To begin, remove the top cover of the machine. Then, remove the back cover. You will then be able to access the bearings and shaft. Once you have access to the parts, remove the belt that connects them. Also disconnect the resistance wires and thermostats, if your machine is equipped with them. Take note of the wire locations so that you can reconnect them correctly later. Now, you can remove the old bearings and shaft. Make sure to identify them properly so that you can replace them with the correct parts. Once you have the new parts in hand, insert the bearings and shaft into their designated slots. Make sure to secure and align them properly. Then, reconnect the resistance wires and thermostats, following the marks you took earlier. Also, put the belt back in place. Finally, replace the back cover and the top cover of the machine. Check that everything is securely fixed and in place. There you go, you're done! You have successfully changed the bearings and shaft of your XXX_BRAND_XXX washing machine model AWM 468. You can now enjoy a repaired appliance without having to spend a fortune on professional repairs. Remember to take necessary precautions during this repair, such as unplugging the machine before starting and wearing protective gloves if necessary. We hope this guide has been helpful to you and that you have successfully resolved your issue.