1287 PHE / 1287H8EL drive belt

How to repair your appliance? Experts will help you...

You want to know how to remove the bearings and internal retaining device of a washing machine after dismantling the machine to replace them. You are unsure if there is a safety device that you cannot see. You have not heard anything since the meeting with Carlos Paz. To remove the bearings, you need to follow the following steps: 1. Remove the back cover and the top cover of the washing machine. Remove the belt and the drum pulley, which is the large pulley. You will see a metal ring resembling a clamp with a large screw around the tank. Remove this ring to remove the tank cover. Sometimes, the tank cover may also detach with the drum. If necessary, separate the cover from the drum to access the bearings. You will see a bearing on each side of the cover. It is imperative to change the seal when replacing the bearings. Otherwise, the bearings may break again in the coming days. In some cases, you may need to disconnect the resistance cables and temperature sensors. Make sure to mark them before disconnecting them so that you can reconnect them correctly later. By following these steps, you will be able to remove the bearings and internal retaining device of your washing machine. Take care to follow the instructions accurately and note all the connections you disconnect to facilitate reassembly later.