The 1200 H MAEL / 1200H8EL belt is a 1200 mm rubber strap with 8 grooves that allows the tub of your washing machine () to turn. It is sold at the best price and will be delivered within 24 hours.
High Demand! During the last 24 hours, this product has been viewed 170 times.
Same day shipping
Return and free exchange within 15 days
Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt)
Elastic belt : yes
Length : 1200 mm
Section : H
Ribs : 8
Fits in : washing machine /
Reference : 46000003, 46007433, , EL 1200 H8, 8PHE1200, 8PHE 1200, 8 PHE 1200, 8 EPH 1200, 8EPH1200, 1200 H MAEL, 1200 PHE, EPH1200
Weight : 32 g
The drive belt of your washing machine () is worn out and must be replaced by the 1200 H MAEL / 1200H8EL belt in the following cases:
You have a top-loading Philco WM-PH13 washing machine. You have already carried out some repairs: you have replaced the broken belt and the non-functioning drain motor. Additionally, you have checked the 4 shock absorbers and found them to be in good condition. You have conducted tests by removing the steel cable from the drainage and noticed that the drum does not spin. You believe this is normal. You have also observed that at the beginning of the spin cycle, the agitator starts rotating a few seconds before the drum, and at a higher speed. It is at this moment that the clothes start piling up and causing the drum to wobble. We understand yoru explanation and advise the following. We recommend checking this device and replacing it if necessary. It is also possible that the drum is unbalanced. In this case, you should check the drum counterweights and adjust them if needed. We hope these suggestions are helpful and remain available for any further questions.
Here are examples for partial reference for home appliances :
Where to find the reference?