Haier washing machine Belt 1234J5EL

How to repair your appliance? Experts will help you...

You are unsure if you have tightened the belt too much and the engine is not powerful enough to move it. To check this, you need to remove the belt and see if the engine works. If the engine works, you will need to change the capacitor and check if it starts. While reviewing the entire washing machine, you noticed that if you push the main body upwards, it has a gap of about two centimeters. This could be the cause of the noise and maybe the body is not rotating properly. If that's the case, this situation can be repaired. If you think that's the case, you can try pushing the pulley with a stick and see if it starts. Also, make sure to check the number of terminals on the motor connector, as well as the color of the wires and their position by looking at the back connector as if you were going to plug it in. Don't forget to check the capacitor by removing it and connecting it in series with a 70 or 100W incandescent bulb to see if it lights up.