Miele tumble dryer Belt 5 PJ 1880 / 1880J5

How to repair your appliance? Experts will help you...

You may be wondering how to change the belt on a Whirlpool dryer model WET3300XQ0. Before you begin, make sure to unplug the dryer from the electrical outlet for safety reasons. Loosen the access panel for the belt at the back of the dryer. It is usually located at the bottom. Use a screwdriver to unscrew the screws that hold the panel in place. Carefully remove the panel. Once the panel is removed, you should be able to see the dryer belt. Take note of its location and how it wraps around the drum and motor. To remove the old belt, you will need to release the tension applied by the motor. Locate the motor pulley and use a socket wrench to loosen the tension screw. Once the tension is released, remove the old belt from the drum and motor. Make sure to note how it was installed to facilitate reassembly. Now it's time to install the new belt. Once the belt is properly positioned, use the socket wrench to tighten the motor tension screw. Make sure the belt is tight, but not too tight. Double-check that the belt is properly installe dand aligned with the drum and motor pulleys. Replace the access panel for the belt and securely screw it in place with the screwdriver. Finally, plug the dryer back into the electrical outlet and test it to ensure that the new belt is functioning correctly. We hope this step-by-step guide has been helpful in changing the belt on yoru Whirlpool dryer model WET3300XQ0.