Candy tumble dryer Belt 1992H11

How to repair your appliance? Experts will help you...

During the spin cycle, the motor fails to reach its maximum speed, resulting in clothes that are still wet. Unplug the motor's input plug. Create a bridge between the stator and the rotor to connect them in series. Apply a direct voltage of 220V and a frequency of 50Hz to the motor. Verify that the motor is running at full speed without any issues. Note that it should consume approximately 1 Ampere when idle, meaning without the belt in place. Once this verification is done, reconnect control board A1D21. Measure the voltage applied to the motor during its rotation. Check if the output voltage of this board is sufficient to allow the motor to run at an optimal speed and function properly. If the output voltage of the board is insufficient, you may need to consider replacing it. Remember to take all necessary precautions when handling the electrical appliance and consult a professional if you are unsure of what you are doing.