The 1966 PHE / 1966H9EL belt is a 1966 mm rubber strap with 9 grooves that allows the tub of your Beko tumble dryer to turn. It is sold at the best price and will be delivered within 24 hours.
Same day shipping
Return and free exchange within 15 days
Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt) 1966H9EL
Elastic belt : yes
Length : 1966 mm
Section : H
Ribs : 9
Fits in : tumble dryer / clothes dryer
Compatible with the following brands : Beko
Reference : 2953240100, 751610119, , EL 1966 H9, 9PHE1966, 9PHE 1966, 9 PHE 1966, 9 EPH 1966, 9EPH1966, 1966 H MAEL, 1966 PHE, EPH1966
Weight : 59 g
The drive belt of your Beko tumble dryer is worn out and must be replaced by the 1966 PHE / 1966H9EL belt in the following cases:
You have a XXX_BRAND_XXX WB24K2 dryer that is approximately 8 years old. During the drying cycle, it starts to squeak and make a strange noise. You wonder what could be causing this. You want to know if this type of dryer has ball bearings. You are unsure of how much it would cost to replace the transmission of this dryer. You need to check if the belt is loose or worn out. If the squeaking sounds like an airplane taking off or landing, it is likely that grease needs to be applied to the clutch area. The lithium-based grease recommended by the manufacturer should be applied to the inner side of the white plastic gear, as shown below. To do this, it would be necessary to remove the unique guiding spring, as illustrated below. And to access the clutch area, you will need to use the following diagram. You need to loosen the nut that holds the pulley on the lower shaft of the transmission housing, without completely removing it.
We always offer the belt recommended by the manufacturer for your appliance. We sell the 1966H9EL belt at the Best Price, we ship it the same day with 24-hour delivery and provide a 2-year warranty.
The 1966H9EL belt is compatible with more than 4 appliances!
Here are examples for partial reference for home appliances :
Where to find the reference?