Princess bread maker Belt 570-3KC-7

How to repair your appliance? Experts will help you...

To change the belt of yoru bread machine, you are wondering how to dismantle it. You have noticed that the belts are worn out, but you see that there are two of them, corresponding to the two beaters of the machine. Here are the steps to follow to perform this repair: 1. Disconnect the bread machine from any power source for safety reasons. Remove all accessories from the machine, such as the kneading paddle, blades, or removable containers. Turn the bread machine upside down and place it on a flat and stable surface. Loosen the fixing screws or clips that hold the machine's casing in place. They are usually located at the back or on the sides of the machine. Use a suitable screwdriver to unscrew the screws or press the clips to release the machine's casing. Once the casing is removed, you will have acces sto the machine's belts. Identify the one that is defective by following the power transmission path. To remove the damaged belt, release the tension applied to it by detaching the elements that hold it in place. These can be hooks, pulleys, or any other fixing mechanism. Gently remove the defective belt by sliding it out of its location. Make sure it is properly tensioned and positioned on each pulley. Put back all the elements you previously removed, making sure to secure them properly. Replace the bread machine's casing by aligning the screws or clips with their corresponding locations. Tighten the screws or press the clips to secure the casing in place. Reconnect the bread machine to a power source and check its proper functioning. By following these steps, you will be able to dismantle your bread machine and change the defective belt. Make sure to always take the necessary precautions and consult the user manual of your machine if needed.