8PH 1930 / 1930H8 drive belt

How to repair your appliance? Experts will help you...

You would like to know how to repair your XXX_BRAND_XXX wwq22 dryer, which has a water leak between the shaft and the mechanical unit after one year of use. You think that the seals and bearings are defective. You have already dismantled the drum, motor, and belt, as well as the mechanical unit from the bottom. However, you are unable to remove the washing drum (tub). Make sure to disconnect your dryer before starting any disassembly operation. Remove the screws or clips that secure the back panel of the dryer and remove it. Locate and disconnect the electrical wires that are connected to the mechanical unit. Take note of their location to facilitate reassembly later. Use an appropriate wrench to loosen and remove the bolts that secure the mechanical unit to the dryer structure. Make sure to support the mechanical unit properly during this operation. Once the bolts are removed, you should be able to move the mechanical unit downwards to access the shaft and seals. Check the condition of the seals and bearings. If you notice any damage or signs of wear, it is best to replace them. To remove the washing drum (tub), it may be necessary to disconnect other elements such as supports or springs that hold it in place. Once the washing drum is removed, you will have easier access to the shaft and seals to perform the necessary repairs. Before reassembling your dryer, make sure t othoroughly clean all parts, including the washing drum. Follow the reassembly steps in reverse order, making sure to reconnect all electrical wires properly and securely fasten all parts. If you encounter difficulties during this repair process, we recommend seeking assistance from a qualified professional to avoid further damaging your dryer.