6 PH 1930 / 1930H6 drive belt

How to repair your appliance? Experts will help you...

To repair your dryer, you first need to remove the right side cover of the washing machine. Then, you can remove the drum pulley by unscrewing the nut in the middle. Once this is done, you need to remove the belt. Next, you need to deal with the drum cover. Start by removing a long screw located on top of the cover. This screw holds a clamp that closes the cover onto the drum. After removing this screw, you can remove the cover, being careful with a rubber seal located between the cover and the tub. This rubber seal serves as a gasket and must be handled with caution. Once you have removed the cover, you can access the internal components of the dryer to perform the necessary repairs. Make sure to follow the manufacturer's instructions or consult a professional if you are unsure of what you are doing. Once the repairs are completed, you can put the cover back in place, making sure to properly reposition the rubber seal. Then, screw in the long screw and put the drum belt back in place. Finally, reattach the drum pulley and tighten the nut in the middle. Your dryer should now be ready to function properly.