Search with the poly v-belt characteristics:

How to read belt numbers

1965 H MAEL / 1965H6EL drive belt

The 1965 H MAEL / 1965H6EL belt is a 1965 mm rubber strap with 6 grooves that allows the tub of your tumble dryer () to turn. It is sold at the best price and will be delivered within 24 hours.

Check that your device is compatible

High Demand! During the last 24 hours, this product has been viewed 40 times.

Compatible
spare
£6.50 incl. tax
 
★★★★★ ★★★★★
7 Reviews

In stock: 6

-36%
Genuine
spare
£12.70 incl. tax
£19.80 -36%
★★★★★ ★★★★★
14 Reviews

In stock: 20

+ -
Add to cart

Same day shipping

Return and free exchange within 15 days

Specifications

Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt)

Elastic belt : yes

Length : 1965 mm

Section : H

Ribs : 6

Fits in : tumble dryer /

Reference : 57X0259, 57X2507, 57X0545, 57X2175, , EL 1965 H6, 6PHE1965, 6PHE 1965, 6 PHE 1965, 6 EPH 1965, 6EPH1965, 1965 H MAEL, 1965 PHE, EPH1965


* Subject to technical changes; no liability accepted for the accuracy of the information given.

Product Description

The drive belt of your tumble dryer () is worn out and must be replaced by the 1965 H MAEL / 1965H6EL belt in the following cases:

  • the clothes dryer starts, you can hear the motor but the machine drum is blocked or does not turn properly;
  • the tumble dryer makes rubbing noises, squeaking or whistling during operation;
  • the tumble dryer smells hot or trips due to overheating.
The 1965HMAEL belt (poly-Vee, drive belt) can also be called: 1965H6EL, 1965 PHE, 1965 PH MAEL.

Top Questions

How to repair your appliance? Experts will help you...

The original belt can be found in Ariston service stores. You can also find it by searching on Google or on the belt-stock.co.uk website. At first glance, this may seem impossible if the provided belt does not seem to fit. However, it is possible to install it. Remove the front of the dryer. This will allow the drum to lower towards the front and come closer to the shaft. Instead of using a screwdriver to wedge the belt and risk damaging the shaft and yoru fingers, use a lightweight metal tube about half an inch in diameter and 20 cm long. This tube will serve as a wedge and lever. Pass the tube between the belt and the drum, tilting it slightly. Then, pass the tube through the motor shaft. Note that the shaf tis inside the tube. By following these steps, you should be able to change the belt of your dryer without any issues.

Belt 1965H6EL

Compatible spare £6.50

Buy now

Here are examples for partial reference for home appliances :

Where to find the reference?