The 1956 J / 1956J5 belt is a 1956 mm rubber strap with 5 grooves that allows the tub of your tumble dryer (Siemens) to turn. It is sold at the best price and will be delivered within 24 hours.
Same day shipping
Return and free exchange within 15 days
Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt)
Elastic belt : no
Length : 1956 mm
Section : J
Ribs : 5
Fits in : tumble dryer /
Compatible with the following brands : Siemens
Reference : 57X0777, , 5PJ 1956, 1956 J5, PJ 1956
Weight : 71 g
The drive belt of your tumble dryer (Siemens) is worn out and must be replaced by the 1956 J / 1956J5 belt in the following cases:
You don't know what could be the cause. It is possible that the new sensor is delivered with the wires reversed, so we advise you to check them. Also make sure that the magnet on the motor pulley is neither broken nor crushed. We hope that these checks can solve your problem. We also inform you that we have rechecked the electronic card and it is in good condition. Therefore, we recommend that you change the motor sensor again and bypass the lid switch. Despite the pause during washing, the spin cycle is working.
Here are examples for partial reference for home appliances :
Where to find the reference?