- Free delivery *
The 1870 H7 / 1870H7 belt is a 1870 mm rubber strap with 7 grooves that allows the tub of your tumble dryer (Hotpoint, Indesit, Creda) to turn. It is sold at the best price and will be delivered within 24 hours.
Same day shipping
Return and free exchange within 15 days
SpecificationsSpare part : ribbed belt (serpentine belt or poly-Vee Drive belt)
Elastic belt : no
Length : 1870 mm
Section : H
Ribs : 7
Fits in : tumble dryer /
Compatible with the following brands : Hotpoint, Indesit, Creda
Reference : C00377899, 481281718182, C00208081, , 7PH 1870, 1870 H7, PH 1870
Weight : 62 g
Product DescriptionThe drive belt of your tumble dryer (Hotpoint, Indesit, Creda) is worn out and must be replaced by the 1870 H7 / 1870H7 belt in the following cases:
Top QuestionsThen, remove the screw and its parts and pull the blade upwards according to the sketch below. Next, remove the hexagonal nut that secures the base of the drum (star) to the top of the transmission housing. You can use a wrenc hand tap on the handle of the wrench to loosen the nut counterclockwise. Be careful not to apply too much force if you are using an extractor, as the star is made of cast iron. Now, you need to go to the bottom of the dryer. To do this, you will need to lay it down so that the main motor is closer to the ground. Once you have removed the belt or strap between the two pulleys, you will need to loosen and remove the 4 screws that hold the pulley guard to the transmission box. This guard is U-shaped.
Compatible appliancesWe always offer the belt recommended by the manufacturer for your appliance. We sell the 1870H7 belt at the Best Price, we ship it the same day with 24-hour delivery and provide a 2-year warranty.
The 1870H7 belt is compatible with more than 3 appliances!
A young team trained
Secure transaction
Free shipping *
Free returns and exhanches : satisfied or your money back for 15 days
Here are examples for partial reference for home appliances :
Where to find the reference?
In stock