1578H5 drive belt

How to repair your appliance? Experts will help you...

The General Electric gas dryer that you own requires some repairs. After performing a thorough cleaning and checking the sensors and timer, you found that one of the coils in the gas valve does not have continuity. Therefore, you replaced the coils, as well as the igniter and belt as a precautionary measure. During yoru tests, you were able to make it work without the drum, but it shut off in less than 3 minutes after producing a flame. You also measured continuity at the start, obtaining a reading of 1 on the tester. Additionally, the ignition button does not fully return to its initial position. In light of this situation, it is recommended to perform another check of all the elements you have already inspected. Make sure that all connections are properly established and that the coils of the gas valve are perfectly installed. Also, check the condition of the igniter and belt that you recently replaced. A qualified technician will be able to accurately diagnose the problem and carry out the necessary repairs. Remember to provide them with all the relevant information you have already gathered to facilitate their intervention. Do not hesitate to take the necessary measures to ensure its proper functioning and extend its lifespan.