Search with the poly v-belt characteristics:

How to read belt numbers

1239J5EL drive belt

The 1239J5EL belt is a 1239 mm rubber strap with 5 grooves that allows the tub of your washing machine () to turn. It is sold at the best price and will be delivered within 24 hours.

Check that your device is compatible

High Demand! During the last 24 hours, this product has been viewed 230 times.

Compatible
spare
£6.50 incl. tax
 
★★★★★ ★★★★★
12 Reviews

In stock: 6

-36%
Genuine
spare
£12.70 incl. tax
£19.80 -36%
★★★★★ ★★★★★
18 Reviews

In stock: 20

+ -
Add to cart

Same day shipping

Return and free exchange within 15 days

Specifications

Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt)

Elastic belt : yes

Length : 1239 mm

Section : J

Ribs : 5

Fits in : washing machine /

Reference : C00310973, 481235818215, 0052296, 5021879819611, AS0040048, 12638100000251, 1036149, , EL 1239 J5, 5PJE1239, 5PJE 1239, 5 PJE 1239, 5 EPJ 1239, 5EPJ1239, 1239 J MAEL, 1239 PJE, EPJ1239

Weight : 36 g


* Subject to technical changes; no liability accepted for the accuracy of the information given.

Product Description

The drive belt of your washing machine () is worn out and must be replaced by the 1239J5EL belt in the following cases:

  • the washer starts, you can hear the motor but the machine drum is blocked or does not turn properly;
  • the washing machine makes rubbing noises, squeaking or whistling during operation;
  • the washing machine smells hot or trips due to overheating.
The 1239J5EL belt (poly-Vee, drive belt) can also be called: 1239 PJE, 5 PJE 1239.

Top Questions

How to repair your appliance? Experts will help you...

You are wondering how to change the rotor of a XXX_BRAND_XXX 5115 washing machine. To begin, remove the back cover of the washing machine. Then, loosen the belt and disconnect the heating element and thermostat. Don't forget to note the arrangement of the wires so that yuo can reconnect them correctly later. Next, loosen the nut on th elarge pulley and remove it. Then, loosen all the screws around the tub cover to completely remove the tub cover. The tub cover, drum, and heating element will come out together. You also need to loosen the lock located on the side of the pulley shaft of the tub cover. Once you have removed all the bolts from the hubcap, pull it backwards to remove the drum from the hubcap, as well as the drum and the resistance. Then, remove the locking pin located on the side of the hubcap pulley. You can then strike the shaft with a solid object other than iron, such as a wooden block, to remove the drum. Once the drum is out, you will find the two bearings in the hubcap: an outer bearing on the pulley side and an inner bearing on the drum side. Don't forget to also replace the rubber seal between the drum and the hubcap, as well as the drum and the resistance.

Belt 1239J5EL

Compatible spare £6.50

Buy now

Here are examples for partial reference for home appliances :

Where to find the reference?