Search with the poly v-belt characteristics:

How to read belt numbers

1236 PJE / 1236J4EL drive belt

The 1236 PJE / 1236J4EL belt is a 1236 mm rubber strap with 4 grooves that allows the tub of your washing machine () to turn. It is sold at the best price and will be delivered within 24 hours.

Check that your device is compatible

High Demand! During the last 24 hours, this product has been viewed 203 times.

Compatible
spare
£5.70 incl. tax
 
★★★★★ ★★★★★
11 Reviews

In stock: 5

-36%
Genuine
spare
£8.90 incl. tax
£13.90 -36%
★★★★★ ★★★★★
20 Reviews

In stock: 20

+ -
Add to cart

Same day shipping

Return and free exchange within 15 days

Specifications

Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt)

Elastic belt : yes

Length : 1236 mm

Section : J

Ribs : 4

Fits in : washing machine /

Reference : 00743658, 481235818206, 481235818158, 483437, C00315247, 751610102, , EL 1236 J4, 4PJE1236, 4PJE 1236, 4 PJE 1236, 4 EPJ 1236, 4EPJ1236, 1236 J MAEL, 1236 PJE, EPJ1236

Weight : 32 g


* Subject to technical changes; no liability accepted for the accuracy of the information given.

Product Description

The drive belt of your washing machine () is worn out and must be replaced by the 1236 PJE / 1236J4EL belt in the following cases:

  • the washer starts, you can hear the motor but the machine drum is blocked or does not turn properly;
  • the washing machine makes rubbing noises, squeaking or whistling during operation;
  • the washing machine smells hot or trips due to overheating.
The 1236PJE belt (poly-Vee, drive belt) can also be called: 1236J4EL, 1236 J MAEL, 4 PJE 1236.

Top Questions

How to repair your appliance? Experts will help you...

You can remove the belt between the two pulleys and observe the behavior of the main motor pulley during the spin cycle. Then, set the wash phase to water only at its lowest level and observe the direction of rotation of the main motor pulley. Using your hands, turn the drum in one direction and then the other. If you notice that the rotating drum does not lock for one of the two directions, it is a sign that the UNIDIRECTIONAL bearing is broken. But be careful, if the bearing is already rusted and you notice a lot of moisture in the area where it is housed, you would need to change the retaining of both fixed drums. To remove the front cover, it is necessary to remove the 2 screws located under the front cover and then lower the cover slightly to lower and unlock the fasteners. If you see a lot of rust and water in the transmission and around the housing, you would need to dismantle the entire part of the washing machine to replace the damaged parts.

Belt 1236J4EL

Compatible spare £5.70

Buy now

Here are examples for partial reference for home appliances :

Where to find the reference?