Search with the poly v-belt characteristics:

How to read belt numbers

1227 PHE / 1227H6EL drive belt

The 1227 PHE / 1227H6EL belt is a 1227 mm rubber strap with 6 grooves that allows the tub of your washing machine () to turn. It is sold at the best price and will be delivered within 24 hours.

Check that your device is compatible

High Demand! During the last 24 hours, this product has been viewed 161 times.

Compatible
spare
£6.30 incl. tax
 
★★★★★ ★★★★★
10 Reviews

In stock: 6

-36%
Genuine
spare
£12.40 incl. tax
£19.40 -36%
★★★★★ ★★★★★
17 Reviews

In stock: 20

+ -
Add to cart

Same day shipping

Return and free exchange within 15 days

Specifications

Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt)

Elastic belt : yes

Length : 1227 mm

Section : H

Ribs : 6

Fits in : washing machine /

Reference : 42028149, 42007204, 42171626, AS0031812, , EL 1227 H6, 6PHE1227, 6PHE 1227, 6 PHE 1227, 6 EPH 1227, 6EPH1227, 1227 H MAEL, 1227 PHE, EPH1227

Weight : 33 g


* Subject to technical changes; no liability accepted for the accuracy of the information given.

Product Description

The drive belt of your washing machine () is worn out and must be replaced by the 1227 PHE / 1227H6EL belt in the following cases:

  • the washer starts, you can hear the motor but the machine drum is blocked or does not turn properly;
  • the washing machine makes rubbing noises, squeaking or whistling during operation;
  • the washing machine smells hot or trips due to overheating.
The 1227PHE belt (poly-Vee, drive belt) can also be called: 1227H6EL, 5PHE1227, 6PHE 1227.

Top Questions

How to repair your appliance? Experts will help you...

You don't know how to change the pins of the XXX_BRAND_XXX excellent 166 tc 600 rpm washing machine. To do this, you must follow these steps: 1. Start by removing the back cover and the top cover of the washing machine. Then remove the belt and the pulley of the drum (the large piece). You will then see a metal ring resembling a clamp around the bowl, with on eor more large screws distributed on the bowl. Unscrew these screws to remove the metal ring and the bowl cover. Sometimes, the bowl cover may come out with the drum included. If this is the case, separate the cover from the drum. Inside the cover, you will find the bearings. There is one on each side. You must change them, otherwise the bearings may break again in a few days. If necessary, you may also need to disconnect the resistance cables and temperature sensors. In this case, do it carefully and remember to mark them before removing them. By following these steps, you will be able to proceed with changing the pins of yoru XXX_BRAND_XXX excellent 166 tc 600 rpm washing machine.

Belt 1227H6EL

Compatible spare £6.30

Buy now

Here are examples for partial reference for home appliances :

Where to find the reference?