Search with the poly v-belt characteristics:

How to read belt numbers

1194J6EL drive belt

The 1194J6EL belt is a 1194 mm rubber strap with 6 grooves that allows the tub of your washing machine () to turn. It is sold at the best price and will be delivered within 24 hours.

Check that your device is compatible

High Demand! During the last 24 hours, this product has been viewed 275 times.

Compatible
spare
£6.30 incl. tax
 
★★★★★ ★★★★★
8 Reviews

In stock: 4

-36%
Genuine
spare
£12.50 incl. tax
£19.50 -36%
★★★★★ ★★★★★
16 Reviews

In stock: 12

+ -
Add to cart

Same day shipping

Return and free exchange within 15 days

Specifications

Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt)

Elastic belt : yes

Length : 1194 mm

Section : J

Ribs : 6

Fits in : washing machine /

Reference : C00144846, 482000022990, C00508668, 481010906609, 5053197131076, 5021879910431, 5010418103328, 269A32, , EL 1194 J6, 6PJE1194, 6PJE 1194, 6 PJE 1194, 6 EPJ 1194, 6EPJ1194, 1194 J MAEL, 1194 PJE, EPJ1194

Weight : 48 g


* Subject to technical changes; no liability accepted for the accuracy of the information given.

Product Description

The drive belt of your washing machine () is worn out and must be replaced by the 1194J6EL belt in the following cases:

  • the washer starts, you can hear the motor but the machine drum is blocked or does not turn properly;
  • the washing machine makes rubbing noises, squeaking or whistling during operation;
  • the washing machine smells hot or trips due to overheating.
The 1194J6EL belt (poly-Vee, drive belt) can also be called: 1994 J6, 6PJE 1194.

Top Questions

How to repair your appliance? Experts will help you...

The washing machine you own is an old model Awm 468 600 revolutions per minute Whirpool. If the belt has grooves and the pulley is smooth, this can cause problems. If you notice that the pulley is jumping, it may be due to the roller. Here are the steps to follow to repair your washing machine: 1. Disconnect the resistor and the thermocouple. Loosen the nut on the pulley. Remove all the screws that hold the trim around the pulley. Remove the nut on the pulley. You will see a cone-shaped nut, remove it. Then, pull the trim backwards and it will detach, along with the steel drum. Remove the trim from the pulley. Then, pull the trim backwards and it will detach, along with the steel drum. Use a piece of wood and paste to remove the drum shaft. You will also need to replace a retaining device on the drum side. Reassemble everything by reversing the disassembly steps. Clean the drum cover and apply lithium grease to it and the shaft. These instructions should allow you to effectively repair your washing machine.

Belt 1194J6EL

Compatible spare £6.30

Buy now

Here are examples for partial reference for home appliances :

Where to find the reference?