The 1266J5EL belt is a 1266 mm rubber strap with 5 grooves that allows the tub of your Smeg washing machine to turn. It is sold at the best price and will be delivered within 24 hours.
High Demand! During the last 24 hours, this product has been viewed 194 times.
Same day shipping
Return and free exchange within 15 days
Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt) 1266J5EL
Elastic belt : yes
Length : 1266 mm
Section : J
Ribs : 5
Fits in : washing machine / washer
Compatible with the following brands : Smeg
Reference : 480111104417, C00315115, 2827160100, , EL 1266 J5, 5PJE1266, 5PJE 1266, 5 PJE 1266, 5 EPJ 1266, 5EPJ1266, 1266 J MAEL, 1266 PJE, EPJ1266
Weight : 41 g
The drive belt of your Smeg washing machine is worn out and must be replaced by the 1266J5EL belt in the following cases:
If the washing machine only washes on one side, it may mean that the machine is only functioning in spin mode. When you changed this part, you mentioned removing a round spring. It is possible that it was installed incorrectly. Make sure that the 2 small hooks of the spring fit properly into the plastic gear and don't forget to grease it. Also, check if the motor makes a sound (a rough sound) when it doesn't rotate on the opposite side. This would indicate that the motor is functioning correctly. You can try the following manipulation: remove the belt and observe if the motor rotates on both sides. It is important to note that the spring only serves to prevent the drum from rotating during washing and can therefore be damaged.
Here are examples for partial reference for home appliances :
Where to find the reference?