Neff washing machine Belt 1255J5EL

How to repair your appliance? Experts will help you...

To check if the drive belt is properly tightened and not slipping on the pulleys, you can follow these steps: 1. Disconnect the washing machine from the power outlet for safety reasons. Open the back panel of the washing machine using the appropriate tools. Loosen the drive belt, which is usually located near the motor. visually check if the belt is loose or if it is slipping on the pulleys. If the belt is loose, use an appropriate wrench to adjust the belt tension by tightening it. If the belt is slipping on the pulleys, check if the pulleys are properly aligned and in good condition. If the pulleys are defective, replace them with compatible spare parts. Also, make sure to check the condition of the thermoactuator and the metal that pushes the clutch. When reassembling the parts, make sure that the small plates on the large shaft are not stuck. If they are, clean them carefully before putting them back in place. Don't forget to properly lubricate the parts that require grease, but make sure to use the correct amount and type of lubricant recommended by the washing machine manufacturer.