Belts

Search with the poly v-belt characteristics:

How to read belt numbers

0
Midea
1274J6EL

Midea washing machine Belt 6PJE 1274 / 1274J6EL

The 6PJE 1274 / 1274J6EL belt is a 1274 mm rubber strap with 6 grooves that allows the tub of your Midea washing machine to turn. It is sold at the best price and will be delivered within 24 hours.

Check that your device is compatible

High Demand! During the last 24 hours, this product has been viewed 272 times.

Compatible
spare
£8.70 incl. tax
 
★★★★★ ★★★★★
10 Reviews

In stock: 2

-36%
Genuine
spare
£16.90 incl. tax
£26.40 -36%
★★★★★ ★★★★★
14 Reviews

In stock: 10

+ -
Add to cart

Same day shipping

Return and free exchange within 15 days

Specifications

Spare part : ribbed belt (serpentine belt or poly-Vee Drive belt) 1274J6EL

Elastic belt : yes

Length : 1274 mm

Section : J

Ribs : 6

Fits in : washing machine / washer

Compatible with the following brands : Midea

Reference : 34010676, AS0041452, 34011006, 12638100000421, 3251431053470, 269A86, , EL 1274 J6, 6PJE1274, 6PJE 1274, 6 PJE 1274, 6 EPJ 1274, 6EPJ1274, 1274 J MAEL, 1274 PJE, EPJ1274

Weight : 60 g


* Subject to technical changes; no liability accepted for the accuracy of the information given.

Product Description

The drive belt of your Midea washing machine is worn out and must be replaced by the 6PJE 1274 / 1274J6EL belt in the following cases:

  • the washer starts, you can hear the motor but the machine drum is blocked or does not turn properly;
  • the washing machine makes rubbing noises, squeaking or whistling during operation;
  • the washing machine smells hot or trips due to overheating.
The 6PJE1274 belt (poly-Vee, drive belt) can also be called: 1274J6EL, 6EPJ1274.

Top Questions

How to repair your appliance? Experts will help you...

To test the engine of yoru washing machine, you must proceed as follows: - Check the capacitor cables. Measure the current with an ammeter for the yellow wire (between 5 A and 1.2 A) and the red wire (between 5 A and 1.2 A). - Test the motor consumption with and without the belt. If the motor heats up and stops working in both cases, it may indicate a problem. - Put the washing machine in rinse mode. If the motor continues to run without stopping and performs the spin cycle correctly, it may indicate a good motor operation. - To test if the motor has faulty windings, observe if the motor heats up and stops after 4 or 5 minutes of operation. - Check the solenoid valve and water filling. When the tank is almost filled to 3/4, you should hear a click from the pressure switch. If the water continues to fill for about 50 additional seconds, it may indicate a problem. This can cause a loss of voltage at the pin from the plate to the motor.

Belt 1274J6EL

Compatible spare £8.70

Buy now

Here are examples for partial reference for home appliances :

Where to find the reference?