Hisense washing machine Belt 6EPJ 1139 / 1139J6EL

How to repair your appliance? Experts will help you...

You own a XXX_BRAND_XXX Concept 5 washing machine. During your first check, you noticed that the circuit board was burnt. Therefore, you proceeded to replace the thermoactuator, the door lock, and the circuit board. Before that, you checked the cables and the motor consumption, which seemed to be working normally. Since you haven't used the machine during this time, you also decided to change the bearings. Now, when you perform a test, the machine fills with water but then stops without doing anything else. You tried to do a direct rotation, but it doesn't work. You noticed that the agitation light is flashing, which was not the case during your first check. The circuit board is in good condition, nothing is burnt. You also tried to run the motor without the belt. It's possible that the board you replaced was burnt, which was the cause of the problem. As for the drain pump and the thermoactuator test, they are in good condition.