Bosch washing machine Belt 1266J5EL

How to repair your appliance? Experts will help you...

If this is the case, you will notice that the whee lor disc located at the bottom of the spin drum is turning without you mentioning it. This could cause the belt to slip between the two pulleys. To remedy this, you should tighten the belt slightly by loosening the two bolts that hold the main motor, then move the main motor slightly away from the speed reducer. However, be careful not to move it too far, as this could require replacing the speed reducer. Another possibility is that the internal spring of a guide inside the plastic gear above the speed reducer pulley is broken. In this case, it would be necessary to consider replacing this defective gear. Finally, it is possible that the drain motor, to which a steel cable is attached, is not receiving a current signal or is damaged. In this case, it would be necessary to check the electrical wiring and ensure that the motor is functioning properly. If the motor is defective, it would need to be replaced. Remember to take all necessary precautions when repairing your washing machine. If you are not confident in your repair skills, it is recommended to seek the assistance of a qualified professional to avoid any risk of accidents.