Beko tumble dryer Belt 226 PHE / 226H5EL

How to repair your appliance? Experts will help you...

To replace the dryer belt, you need to remove the front panel. This will allow you to access the belt and replace it easily. Here are the steps to follow: 1. Unplug your dryer from the electrical outlet for safety reasons. Loosen the screws that hold the front panel in place. They are usually located near the bottom of the panel. Use a suitable screwdriver to unscrew these screws and remove them. Once the screws are removed, gently pull the front panel to detach it from the dryer. Once the front panel is removed, you will have access to the dryer belt. Note how the belt is attached around the drum and the motor. Take note of its position and path. Remove the belt from its current position by detaching it from the drum and the motor. Be careful not to lose or damage it. Make sure the belt is properly tensioned and securely attached around the drum and the motor. Replace the front panel by aligning it correctly with the rest of the dryer. Screw the front panel fixing screws to hold it in place. Plug your dryer into the electrical outlet. Test the dryer's operation by turning it on to ensure that the belt is properly installed and that it is functioning correctly. By following these steps, you will be able to replace the belt of your dryer by removing the front panel. If you encounter difficulties or have additional questions, do not hesitate to seek assistance from a professional repair technician.